點擊圖片查看原圖
更多..推薦產品
免費發布信息網站
貿易服務免費平臺
貿易服務免費平臺
|
公司基本資料信息
|
||||||||||||||||||||||||||||||
狹縫掃描式光束質量分析儀
| 特性高精度分析光束質量和空間功率分布單個獨立的測量頭用于連續或脈沖激光束掃描速度可變集成功率計（未校準）高動態范圍低噪聲放大器2D或偽3D圖形快速USB2.0連接PC軟件的特性 |
| ||||||||||||||||||||||||||||||
| 帶易于調節的子窗口的多功能圖形界面可調節位置的X和Y軸截面輪廓帶橢圓光束擬合的2D功率密度圖形，靈活的3D圖形總光束功率隨時間的曲線分析中心位置的漂移 | 圖形和文本文件輸出可按序列保存（新）通過/失敗分析自動M 光束質量測量模塊更高精度的熱噪點和背景光校正（新）可設置的顏色配置（新） |
| Item # | BP104-UV | BP104-VIS | BP104-IR | BP104-IR2 | BP109-UV | BP109-VIS | BP109-IR | BP109-IR2 |
|---|---|---|---|---|---|---|---|---|
| Sensor | ||||||||
| Wavelength Range (nm) | 200 - 1100 | 400 - 1100 | 700 - 1800 | 1000 - 2700 | 200 - 1100 | 400 - 1100 | 700 - 1800 | 1000 - 2700 |
| Detector Type | Si - UV Enhanced | Si | Ge | Extended InGaAs | Si - UV Enhanced | Si | Ge | Extended InGaAs |
| Aperture Diameter | 4 mm | 9 mm | ||||||
| Scan Method | Scanning Slits | |||||||
| Slit Size | 2.5 m | 5 m | ||||||
| Min Beam Diameter | 10 m | 20 m | ||||||
| Max Beam Diameter | 4 mm | 9 mm* | ||||||
| Scan Rate | 1.0 - 20.0 per s (continuously variable) | |||||||
| Sampling Resolution | 0.5 - 38 m (depending on scan rate) | 1.1 - 38 m (depending on scan rate) | ||||||
| Power Range | 10 nW - 10 W (depending on beam diameter and model) | |||||||
| Amplifier Bandwidth | 10 to 150 kHz in 10 kHz Steps (@ -1 dB) | |||||||
| Sample Frequency | 0.0625 - 1.0 MHz | |||||||
| Dynamic Range | 72 dB (Amplifier Switchable) | |||||||
| Signal Digitization | 16 bit | |||||||
| Head Size | 80 mm x 60 mm (including rotation mount) | |||||||
| Minimum Pulse Rate | 10 Hz (300 kHz if using the M Option) | |||||||
| Software | ||||||||
| Displayed Parameters/Features | X-Y-Profile, Centroid Position, Peak Position, Pseudo 3D Profile, Beam Width Clip Level/Second Moment (4 ), Gaussian Fit Applicable, Colored Pass/Fail Test | |||||||
| Compliant to Norm | ISO 11146 (Beam Widths, Divergence Angle and Beam Propagation Factor) | |||||||
| General System Requirements | Windows 2000/XP/Vista or later, USB2.0 port recommended, 120 MB HD, 512 MB RAM | |||||||
| M Analysis System | ||||||||
| Compatible M Options | BP1M2-xx Series, M2SET-xxx Series | |||||||
| Compliant to Norm | ISO 11146 | |||||||
| Measured Parameters** | M , Waist Width, Waist Position, Rayleigh Length, Divergence, Beam Pointing, Waist Asymmetry, Astigmatism | |||||||
