是否提供加工定制:是 | 用途:適用于各種電線押出 |
是否提供加工定制:是 | 用途:適用于各種電線押出 |
敬請各位買家來電0571-64091635或來郵ouyangjianhong@163.com洽談,亦或百忙中抽時間來本公司工廠參觀指導,恭候您的來臨!東莞銷售熱線0769-89030053歐陽先生
30 65 45皮泡皮三層共擠押出機 |
30 65 45 Skin foam skin three skin three layer extrusion |
| |
名稱 Description | 參數 Specification |
最高線速 Max.line speed | 200m/min |
放線功率 Pay off power | 5.5KW |
放線張力 Pay off tension | 擺臂式可調配重 Re-set |
放線盤直徑 Pay off coil diameter | 400-500Mm |
放線盤升降 Pay off coil up and down | 手動液壓式Hydraulic |
前牽引功率 Former traction power | 5.5kw |
預熱箱長度 Length of pre-heater | 1.5m |
內皮層電機功率Cortex machine motor power | 1.5kw |
主電機功率 Main motor power | 22kw |
外皮層電機功率Outside of the cortex power | 5.5kw |
活動水槽長度 ength of movable trough | 4m |
雙層水槽功率 ength ofdouble trough | 15m |
后牽引功率Later traction power | 5.5kw |
牽引輪直徑 Diameter of traction wheel | 800mm |
儲線功率 Power of reserve line | 2.2kw |
儲線長度 Length of reserve line | 200m |
計米方式 Ways of counting meter | 光電感應式 Hotoelectric |
收線功率 Take up power | 3.7KW |
收線盤直徑Diameter of take up | 400-630Mm |
電氣控制 Electrical control | PCL 侯服控制器 Servo |
電源電壓 Power supply V | ∽3×380(±5﹪)V |
電源頻率 powerfrequency Hz | 50(±2﹪)HZ |
生產線外形尺寸 Figure dimension | 37.9*3.8*2.6m |
| |
| |
機組配置 Unit configuration | |
名稱 Name | 數量 Size |
主動放線架 | 1臺 |
pay off | |
前牽引功率 | 1臺 |
Former traction machine | |
預熱器 | 1臺 |
pre-heater machine | |
縱橫整直臺 | 1組 |
Straightening table | |
內皮層機 | 1臺 |
Within the cortex machine | |
押出主機 | 1套 |
Main extrusion | |
外皮層機 | 1臺 |
Outside of the cortex machine | |
電氣控制柜 | 1套 |
Electrical controller | |
活動冷卻水槽 | 1組 |
movable cooling water trough | |
前后測徑儀 | 1臺 |
Diameter testing | |
雙層冷卻水槽 | 1組 |
Double layer cooling trough | |
水中容電 | 1臺 |
In-water capacitance tester | |
牽引機 | 1臺 |
Traction machine | |
儲線架 | 1套 |
Reserve line reck | |
計米臺 | 1臺 |
Length counter | |
收線機 | 1臺 |
Take up | |
| |