HXD-1000TMC/HXD-1000TMC/LCD帶圖像分析自動轉塔顯微硬度計 ■技術規格型號TypeHXD-1000TMCHXD-1000TMC/LCD物鏡/壓頭切換Lens/Indenterswitch自動轉塔切換WithMotorizedTurret試驗力Testforce9.807,4.903,2.942,1.961,0.9807,0.4903,0.2452,0.0981N1000,500,300,200,100,50,25,10gf加荷方式Loadingmode程控自動加載,保持和卸載Program-controlledapplication,durationandremovalofload保荷時間Durationtime5 60secselectable步長(Instepof)5sec.硬度測量范圍Measuringrange5HV 3000HV測量顯微鏡Microscope物鏡Objective:40x;10x（觀察用Forobservation）目鏡Eyepiece:15x總倍率 Total: 600x; 150x（觀察用Forobservation）X-Y測試臺X-Ystage尺寸Dimensions：100X100mm最大移動Travelrange：25X25mm最小讀數Resolution：1/100mm顯示器上倍率MagnifyonTV約About1600x最小檢測單位Min.detection0.025 m操作系統OSWin2000/XP測量讀數方式Measuringmode 計算機自動測量圖像分析，硬度軟件精確修正和梯度圖示。也可目鏡測量。輸出測量數據，采集金相圖像，及硬度梯度圖，并打印和保存Automeasurement,pictureanalysis,accuratecorrection,Printoutorsaveinfilesthemeasureddata,image,graphsandlayerhardnessgradientgraph. 試件最大高度Max..testheight85mm精度Accuracy執行標準：中華人民共和國國家標準GB/T4340.2-1999金屬維氏硬度計試驗第二部分：硬度計的檢驗上海市企業標準Q/NWFQ01-2002顯微硬度計標準配件，附件Standardattachments物鏡40x,10x,維氏壓頭(在機上)測量目鏡15X標準硬度塊(700HV1400HV0.2)薄片夾緊器小圓柱體夾緊器平口鉗水平儀鹵素?zé)襞蓦娫淳€(xiàn)保險絲輔助工具使用說明書LCD型:打印機（內置）電腦主機及硬度分析軟件一套CCD彩色攝像頭激光打印機選購件Options努氏壓頭Knoopindenter數碼相機及適配鏡Digitalcamera adaptor可配金相分析軟件FullyAutomaticmeasurementsystem電源Powersupply220VAC,50/60Hz尺寸Dimensions外包尺寸54x50x64cm(Packingsize)毛重Grossweight80kg