澆注機頭采用耐磨特殊型剛制作出高精度針閥裝置，使注料同步、壽命長、操作簡便。 機頭轉動由螺旋長齒型4B76變速帶組成混合頭裝置，攪拌轉速達到N=8800r/min(每分鐘8800轉)，使料液攪拌混合均勻，出料流暢不會阻塞。使制品密度均勻富有彈性。（如配制冷裝置，可使?jié)沧㈩^連續澆注，清洗間隔長并且減少混合頭清洗次數并配有仃電沖洗裝置減輕環境污染降低成品。提高產品競爭力省時省料經濟效益顯著）。 計量采用電腦控制，并采用高精度K12B精密計量泵（誤差3g %0）。可制作500多個雙色雙密度不同品位制品，同時可隨時切換不同顏色密度PU制品。 原料灌配有120L-250升（A1A2B三組份）原料輸送管道由導熱層循環保溫，原料灌采用導熱油夾層并用Pu硬泡注入夾層進行雙保溫，達到料溫穩定不會凍結，及保溫均勻自動恒溫耗電量低。 生產線由19米60工位25米82工位臺車組成，每個臺車能放1雙鞋模（500mm2x600 mm2）運送，采用澆注鋼鐵制作滑輪耐磨性強，運動平穩無燥聲。轉動可調節快慢，烘道采用熱循環由保溫層隔層制作，有電熱、油熱及油電二用裝置，升溫快慢熱量均勻保溫性能佳，達到自動恒溫?zé)崃砍渥?，升溫快速?機器沒有合模力，模具手動開合。 Head of pouring machine adopts anti-abrasion special type steel to manufacture high precision needle value device and make the poured material synchronous,with long service life and convenient operation. The rotation mechanism of machine head is kind of mixture head device,which is formed by spiral long tooth type 4B76 speed changer.The mixing speed can reach N=8800r/min(8800r/m) to make the material liquid be mixed evenly,and the output of material smooth without blocked.The product density is even full of elasticity.(If equipped with refrigeration machanism,the pouring head can continuously pour with long interval for cleaning and the cleaning times of mixing head can be reduced.It is equipped with power off cleaning mechanism to reduce environmental pollution and reduce cost.It can enhance competitive force of product, save time and save materials with prominent economic benefits.) Metering is controlled by computer.Adopt high percision K12Bprecise metering pump (Error 3g %0),through which,more than 500 double-color double-density products with various qualities can be manufactured.And also,different colors and densities can be changed at any time to produce PU products. The raw materials tank is equipped with 120L-250L(A1 A2B three components) raw materials transportation pipe,cycling heat preser-vation by heat guiding layer.The raw materials tank adopts heat guiding oil jacket and PU hard foam is poured into jacket for double heat preservation to make the material temperature be stable with out freezing,and the heat preservation is equal,low power consumption for automatic constant temperature. The production line consists of 10m 60 stations and 25m 82 stations machine pallets. Each pallet can contain 1 pair of shoe molds(500mm2 x 600mm2)for transportation.Adopt pouring steel to manufacture.Good anti-abrasive performance heat cycling,which is manufactured by isolated heat preservation layer .Electric heating, oil heating and double use of electric anf oil heating mechanisms are available.The heat quantity for slow or fast temperature rising is equal with good heat preservation performance.Heat quantity of automatic constant temperature is enough with rapid temperature rising. Machine has no clamping force.Moulds are opened and closed manually by hand.